Specifications; Combinations Of Cutting Attachments, Deflectors And Carrying Systems - Stihl FS 235 R Instruction Manual

19 Specifications

► Dry the spark plug (2).
WARNING
■ Unconfined sparks may occur if the starter grip
is pulled after the spark plug boot has been
removed. Sparks may cause a fire or an
explosion in an easily combustible or explo‐
sive environment. This can result in serious or
fatal injuries and damage to property.
► Move the slide control to position
before pulling the starter grip.
► Move the slide control to position .
► Pull the starter grip (3) several times and
guide it back slowly.
The combustion chamber is cleared.
► Insert and tighten down the spark plug (2)
firmly.
► Connect the spark plug boot (1) and press it
down firmly.
19 Specifications
19.1 STIHL FS 235 R Trimmer
– Displacement: 36.3 cc
– Engine power to ISO 8893: 1.55 kW (2.1 bhp)
at 9,000 rpm
– Idle speed: 2,800 rpm
– Max. output shaft speed: 7,900 rpm
– Approved spark plug: Bosch WSR 6 F from
STIHL
– Electrode gap: 0.5 mm
– Dry weight without cutting attachment and
deflector: 6.5 kg
– Length without cutting attachment: 1807 mm
– Max. fuel tank capacity: 810 cc (0.81 l)
19.2 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
Using with a mowing head
– Sound pressure level L
to ISO 22868: 99 dB(A).
20 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
20.1

Combinations of Cutting Attachments, Deflectors and Carrying Systems

Cutting attachment
– AutoCut C 26-2 mowing
head
– AutoCut 36-2 mowing head
0458-500-0121-B
measured according
pA
Deflector
– Universal
deflector with
– Sound power level L
ISO 22868: 111 dB(A).
– Vibration level a
hv
ISO 22867:
– Control handle: 6.5 m/s².
– Left handle: 6.8 m/s².
Using with a metal cutting attachment
– Sound pressure level L
to ISO 22868: 99 dB(A).
– Sound power level L
ISO 22868: 111 dB(A).
– Vibration level a
hv
ISO 22867:
– Control handle: 5.8 m/s².
– Left handle: 5.0 m/s².
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.3 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.4 Exhaust Emissions
The CO value measured in the EU type approval
2
procedure is specified at www.stihl.com/co2.
The measured CO
2
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
Barrier bar Carrying system
– optional – Shoulder strap
– Full harness with quick
measured according to
wA
measured according to
measured according
pA
measured according to
wA
measured according to
value was determined on a
release system
English
21