ActionTec T3280 User Manual page 8

USB
This LED brights green when there is an active device connected to the USB
port.
Wi-Fi 2.4G
This LED brights green when the Gateway's radio is operating in the 2.4GHz
band.
Wi-Fi 5G
This LED brights green when the Gateway's radio is operating in the 5GHz
band.
WPS Button
The WPS button is used when connecting a wireless device to the Gateway's
wireless network using WPS.
Rear Panel
The rear panel of the Gateway features 8 ports, and a Reset button.
Power Port
The Power port is used to connect the Power cord (Model No.
CDS024T-W120U, made by Actiontec) to the Gateway.
Reset Button
Depressing the Reset button for 10 seconds will restore the Gateway's
factory default settings. The reset process will start after releasing the
Windstream T3280 Gateway
button.
7