Product Description And Specifications; Intended Use; Product Features - Bosch Professional D-tect 200 C Original Instructions Manual

Do not attempt to recharge the button cell and do not short circuit the button
u
cell. The button cell may leak, explode, catch fire and cause personal injury.
Remove and dispose of drained button cells correctly. Drained button cells may
u
leak and damage the product or cause personal injury.
Do not overheat the button cell or throw it into fire. The button cell may leak, ex-
u
plode, catch fire and cause personal injury.
Do not damage the button cell and or take the button cell apart. The button cell
u
may leak, explode, catch fire and cause personal injury.
Do not allow damaged button cells to come into contact with water. Leaking lith-
u
ium may mix with water to create hydrogen, which could cause a fire, an explosion, or
personal injury.

Product Description and Specifications

Please observe the illustrations at the beginning of this operating manual.

Intended Use

The measuring tool is intended for the detection of objects in walls, ceilings and floors.
Depending on the material and condition of the base material, it is possible to detect
metal objects, wooden beams, plastic pipes, conductors and cables.
The measuring tool complies with the limits of the standards specified in the declaration
of conformity. The EU declaration of conformity is available at
http://eu-doc.bosch.com/.
On this basis, clarification is required as to whether the measuring tool can be used in
places such as hospitals, nuclear power plants and in the vicinity of airports and mobile
phone base stations.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the illustration of the measuring
tool on the graphic page.
(1) Top marking aid
(2) Wheel
(3) Slot for microSD card
(4) USB Type-C® port
(5) Left-hand and right-hand marking aids
Bosch Power Tools
a)
English | 37
1 609 92A 5L5 | (11.01.2021)