How To Spray - Graco MAGNUM TRUE AIRLESS X5 Owner's Manual

How to Spray

To avoid serious injury from skin injection
do not put your hand in front of the spray tip
when installing or removing the spray tip
and tip guard.
Spray Tip Installation
To prevent spray tip leaks make certain spray
tip and tip guard are installed properly.
1. Perform Pressure Relief Procedure,
page 13.
2. Engage trigger lock.
3. Verify spray tip and tip guard parts are
assembled in the order shown.
SPRAY
TIP
RUBBER
GASKET/
TIP
METAL SEAL
GUARD
RETAINING
NUT
a. Use spray tip to align gasket and
seal in the tip guard.
3A4416A
b.
c.
4. Screw spray tip and tip guard assembly
onto the gun and tighten.
ti27140a
ti27480a
How to Spray
Spray tip must be pushed all the
way into the tip guard. Turn spray tip
to push down.
Turn the arrow shaped handle on
the spray tip forward to the spray
position.
ti27143a
ti27145a
19