Partially Reflective Glass Cleaning; Glass Door Cleaning; Servicing - Caesar Fireplace CHFP-002 Installation And Operating Instructions Manual

8.0 MAINTENANCE
DISCONNECT POWER AND ALLOW HEATER TO COOL BEFORE ATTEMPTING ANY MAINTENANCE OR CLEANING TO
THE FIREPLACE SHOULD NOT BE OPERATED WITH AN ACCUMULATION OF DUST OR DIRT ON OR IN THE UNIT, AS
THIS CAN CAUSE A BUILD UP OF HEAT AND SUBSEQUENT EVENTUAL DAMAGE. FOR THIS REASON THE HEATER
MUST BE INSPECTED REGULARLY, DEPENDING ON CONDITIONS AND AT LEAST AT YEARLY INTERVALS.

8.1 PARTIALLY REFLECTIVE GLASS CLEANING

The partially reflective glass is cleaned in the factory during the assembly operation. During shipment, installation,
handling, etc., the partially reflective glass may collect dust particles; these can be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other marks, the partially reflective glass can be cleaned with a damp cloth. The partially
reflective glass should be completely dried with a lint-free cloth to prevent water spots. To prevent scratching, do
not use abrasive cleaners.
8.2 GLASS DOOR
Use only a damp cloth to clean glass door of the fireplace. Do not use abrasive cleaners.

8.3 SERVICING

Except for installation and cleaning described in this manual, an authorized service representative should perform
any other servicing.
23
REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR DAMAGE TO PERSON.
CLEANING
WARNING
!