Asus ROG STRIX H370-F GAMING User Manual page 31

6. USB 2.0 connector (10-1 pin USB910)
This connector is for USB 2.0 ports. Connect the USB module cable to these
connectors, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 specification that supports up to 480 Mb/s
connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
7. LED connector (13-pin LED1_CON1)
This connector is for connecting the LED card located under the motherboard back IO
cover.
ROG STRIX H370-F GAMING
1-15