Toshiba RAS-10PKVPG-NZ Service Manual page 121

No. Part name
Front cabinet 1. Detachment
‚
2. Attachment
Procedure
1) Perform step 1 in  .
2) Remove the fixing screws (ST2TØ4 × 10L
2 pcs.) used to secure the front cabinet
and inverter cover, the screws (ST2TØ4
× 10L 4 pcs.) used to secure the front
cabinet at the bottom, and the fixing
screws (ST2TØ4 × 10L 2 pcs.) used to
secure the motor base.
• The front cabinet is fitted into the side
cabinet (left) at the front left side so pull
up the top of the front cabinet to remove
it.
1) Insert the claw on the front left side into
the side cabinet (left).
2) Hook the bottom part of the front right side
onto the concave section of the bottom
plate. Insert the claw of the side cabinet
(right) into the square hole in the front
cabinet.
3) Return the screws that were removed
above to their original positions and attach
them.
Claw
- 121 -
FILE NO. SVM-18049
Remarks
Front cabinet
Square
hole
Concave section