Bush Hog 300 Series Operator's Manual page 32

BUSH HOG 300 SERIES REAR MOUNTED BLADE
Your Bush Hog 300 Series should now be assembled and inspected for any evidence of defective or damaged
parts before use. Any evidence of damage should be reported to your dealer immediately. After Hydraulic
Lines have been attached to tractor and Three-Point Hitch attached, carefully remove safety blocks from
Moldboard pivot Point.
This section of the Operator's Manual is designed to familiarize, instruct, and educate safe and proper blade
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rear blade and are not necessarily of a 300 Series blade. Some pictures may
show shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place
and in good operational condition. The operator must be familiar with the blade and tractor operation and all
associated safety practices before operating the blade and tractor. Proper operation of the blade, as detailed in
this manual, will help ensure years of safe and satisfactory use of the rear blade.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
300 Series 09/10
© 2010 Alamo Group Inc.
OPERATION
OPERATION INSTRUCTIONS
Operation Section 4-2
(SG-2)