Bush Hog 300 Series Operator's Manual page 23

Rear mounted blade

Hide thumbs Also See for 300 Series:

Table of Contents

The 300 Series Blade is available in widths of 12' and 14' and features a massive CAT III-IV three-point hitch

and quick-hitch. The 14' model is rated for up to 250 draw bar horsepower wheel-type tractors. Hydraulic

adjustment of the mainframe swing, moldboard angle, and moldboard tilt is standard for easy and fast

adjustments. The 300 Series features a maximum of 50" of offset to easily reach outside the dual wheels of

large tractors. The 5" diameter solid steel kingpin, boxed-section, reinforced 1/2" x 20" moldboard, and heavy-

duty hitch and mainframe provide the dependability Bush Hog blades are known for. Skid shoes, quick-tach

end plates, and dual gauge wheels are optional equipment adding to the versatility of the 300 Series blade.

At least 20% or the tractor's weight must be on the front tires with the implement lifted to

provide adequate traction for safe steering under good conditions. Slow down on hills,

rough terrain, and curves.

Front and rear, and left and right are determined by the normal direction of travel (the same as on your

automobile).

300 Series 09/10

INTRODUCTION

Introduction Section 2-3

Table of Contents