Adjust Temperature (Temporary Hold); Adjusting Comfort Activities (See Comfort Profiles - Carrier Infinity SYSTXCCICF01-B Owner's Manual

• Touch the DAY and TIME label located at the top middle of the
screen or access by going through the menu screen (see page 44).
• To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the
feature you wish to change.
• Use the Up (Y) and Down (B) buttons to make the appropriate
changes.
• When you have completed all of the settings, touch SAVE.
• If you make a mistake you may touch CANCEL and begin again.

3.3. Adjust Temperature (Temporary Hold)

The Infinity System Control allows you to temporarily override your
programmed schedule by adjusting the indoor temperature at any time to
meet your needs.
NOTE: The Infinity System may seem slow to react to set point, activity
and system mode changes. This is normal, as the system will ramp up
capacity and fan speeds slowly to achieve the proper level of home
conditioning, while avoiding wasting energy, stressing home circuits and
dimming lights with a "hard start."
3.4. Adjusting Comfort Activities (See Comfort
Profiles on page 19)
• To adjust the comfort activity, enter the Main Screen by touching
anywhere on the Control.
• Touch the activity/top button under the Touch 'N' Go® feature on the
left side of the screen; then select the desired activity of HOME,
AWAY, SLEEP, or WAKE.
• Use the Up (Y) and Down (B) buttons to change the time to
temporarily hold the desired temperature in 15 minute increments.
• When the correct time interval is displayed, touch DONE.
12