Display Lamp Brightness Adjustment; Comfort Sleep Mode - Toshiba RAS-25J2KVSG-ND Service Manual

Item
23. Display lamp
To decrease the display lamp brightness or turn it off.
brightness
1.
adjustment
2. Press
● In the examples of
24. COMFORT Cooling mode
SLEEP mode
• The preset temperature will increase as
show on ECO operation (Item No. 9)
• Press the [COMFORT SLEEP] button to
choose the operating hours. Repeat
pressing to select the hours.
(1hr, 3hr, 5hr or 9hr)
• If the [COMFORT SLEEP] button is pressed
again means cancel comfort sleep mode.
Heating mode
• The preset temperature will drop down as
show on ECO operation (Item No. 9)
• Press the [COMFORT SLEEP] button to
choose the operating hours. Repeat
pressing to setect thehours.
(1hr, 3hr, 5hr or 9 hr)
• If the [COMFORT SLEEP] button is pressed
again means cancel comfort sleep mode.
Operation flow and applicable data, etc.
FAN
Press and hold
or ) is shown on remote control LCD then release the button.
or
Rise
Decrease
Rremote control LCD
Lamp illuminates an operation with full brightness.
Lamp illuminates an operation with 50% brightness.
Lamp illuminates an operation with 50% brightness and the
operation mode lamp is turned off.
All lamps are turned off.
and
going off.
for 3 seconds until brightness level (
to adjust brightness in 4 levels.
Operation display
, the lamp illuminates for 5 seconds before
The principles of comfort sleep mode are:
• Quietness for more comfortable. When
room temperature reach setting temperature
• Save energy by changing room temperature
automatically.
• The air condition can shut down by itself
automatically.
Remarks:
1. Comfort sleep mode will not operate in dry
mode and fan only mode.
- 47 -
Description
, ,
Brightness
100%
50%
50%
All turned off