Base Cover Removal
Prerequisite:
ODD (Optical Disk Drive) Module Removal
1. Remove twentythree (23) screws from the lower case (Figure 3-11).
2. Remove the base cover.
Figure 3-11. Outside Screws
Base Cover Installation
1. Install the base cover and press downward until the tab engages.
2. Secure twenty three (23) screws. Refer to
3. Install the ODD.
ID
Size
Red Call
M2.5*6.0
out
Green
M2.0*3.0
Call out
Machine Maintenance Procedures
Figure
3-11.
Quantity
19
4
Screw Type
3-15
0
0