Replacing the Mainboard
1. Connect the DC input cable to the mainboard.
Figure 3-103. DC input Cable
2. Slide the mainboard toward the left side of the lower case, with the I/O ports of the
mainboard extruding from their port holes, then lower the mainboard in place.
Note the following reminders:
Make sure a RTC battery is installed on the mainboard.
Check that the DC input cable is properly positioned on the top left corner of the lower
case.
Check that the RF switch cable is properly routed through the cable guides on the front
edge of the lower case.
Figure 3-104. Mainboard
3-70
Machine Maintenance
0