Table of Contents
Advertisement
Replacing the Mainboard
1. Connect the DC input cable to the mainboard (a).
2. Connect the LAN cable to the mainboard (b).
3. With the mainboard at a 45 degree angle position the I/O ports of the mainboard to align
with the port holes of the lower case.
4. Lower the mainboard in place (c).
Note the following reminders:
Make sure a RTC battery is installed on the mainboard.
Check that the DC input cable is properly positioned on the top left corner of the lower
case.
5. Connect the DC in cable to the mainboard.
6. Gently turn the mainboard on its side and place it into the lower case assembly.
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Machine Maintenance
.
Figure 3-103. DC In Cable
Figure 3-104. Mainboard
пч сти и комплектующие для ноутбук . хемы, сервис м ну лы, инструкции по р зборке ноутбук .
. г.
нкт- етербург, ел.(812)951-37-99, ел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
0
3-69
Advertisement
Table of Contents
