Using UUIDTools
The UUID (Universally Unique Identifier) Tool copies BIOS information to EEPROM
(Electrically Erasable Programmable Read-Only Memory). Used in the DMI pool data for
hardware management.
To update the DMI Pool, perform the following:
1. Unzip UUID package tool to USB Flash Disk.
2. Boot from USB and excute stuuid20.exe under DOS mode.
3. At the command prompt, run VEEPROM.exe to write any changes in the data to the
EEPROM.
Figure 2-29. UUID Tool Main Screen
2-26
0
(Figure
2-29)
System Utilities