Acer Aspire 2010 Service Manual page 50

Insyde Software SCU
5:40:09 AM
Main
----Devices---------------------------------------------------
Product Name = Aspire 2010
Manufacture Name = Acer
System BIOS Version = V1.00
VGA BIOS Version =
HDD Model Name = HITACHI_DK23EA-40
HDD Serial Number = 8D4648
ATAPI Model Name= UJDA740 DVD/CDROM
Serial #: ( 32 bytes)
Asset Tag#: (32 bytes)
UUID = (16 bytes)
Setup system date, time. Enable boot logo and get system information.
Parameter
Product Name
Manufacture Name
System BIOS Version
VGA BIOS Version
Hard Disk Mode Name
HDD Serial Number
ATAPI
Serial Number
Asset Tag
UUID
System
43
Advanced
Description
This field will show product name.
This field will show manufacturer name.
This field reports the BIOS version of system.
This field reports the VGA version of the system.
This item will show the size of HDD installed on
Primary IDE master. The hard disk size is
automatically detected by the system. If there is no
hard disk present or unknown type, "None" should
be shown on this field.
This item allows the serial number of the Hard Disk.
If there is no hard disk present or unknown type,
"None" should be shown on this field.
This item will show the model name of DVD/CD-
ROM drive installed on system. The DVD/CD-ROM
model name is automatically detected by the
system. If there is no DVD/CD-ROM model present
or unknown type, "None" should be shown on this
field.
This item will show the Serial number of system.
This item will show the Asset Tag number of the
system.
This number only valid when there is an internal LAN
device presents, otherwise, zero will be display in
this field.
First field reports the model name of processor.
Second field reports CPU Speed.
May 20, 2003
Security Boot
-----System------------------------
-
CPU = Intel® Pentium ® M
CPU Speed = 1600 MHz
----Memory-----------------------
Base Memory = 640 KB
Extended Memory = 255MB
VGA Memory = 64 MB
Exit
Chapter 2