Exit
The Exit screen contains parameters that help safeguard and protect your computer from unauthorized use.
Insyde Software SCU
Main
Advanced
<Tab> <Right> <Left> for block select. <Up> <Down> for item select.
< Enter> for accept. <Cancel> <Esc> for reject. <Alt> activates accelerators.
<Space> for Enable or Disable.
The table below describes the parameters in this screen.
Parameter
Exit Saving Changes
Exit Discarding
Changes
Load Setup Default
Discard Changes
Chapter 2
Security
--------------Exit Saving Changes-------------------
Press <OK> to save the current
Setup parameters to CMOS RAM.
The system will reboot !!!
OK
Allows the user to save changes to CMOS and reboot the system.
Allows the user Discards changes made and exits System Setup.
Loads default settings for all parameters (same as t ).
Allows the user to discard previous changes in CMOS Setup.
Boot
Exit Discarding Changes
Load Setup Default
Discard Changes
Cancel
Description
May 20, 2003 5:40:09
Exit
Exit Saving Changes
54