Panasonic PressIT TY-WP2B1W Operating Instructions - Basic Manual page 17

Notes on Using Wireless LAN
Wireless LAN uses radio waves in the 5 GHz bands.
Be sure to read and fully understand the following items
before use.
Use this product indoors.
●
Using the 5 GHz-band wireless device outdoors is
prohibited by the Radio Act.
If at all possible, avoid the use of cellular phones, TV
sets or radios near the product.
●
Cellular phones, TV sets, radios and similar devices
use different radio bands from the product, so
there is no effect on wireless communication or the
transmission and reception of these devices. However,
radio waves from the product may produce audio or
video noise.
Wireless communication radio waves cannot
penetrate steel reinforcements, metal, concrete, etc.
●
Communication is possible through walls and floors
made from materials such as wood and glass (except
glass containing wire mesh), but not through walls
and floors made from steel reinforcements, metal,
concrete, etc.
The product may not work properly due to strong
radio wave from the broadcast station or the radio.
●
If there is any facility or equipment, which outputs
strong radio wave, near the installation location, set up
the product at a location sufficiently far from the source
of the radio wave.
Using the product outside the country
●
It is forbidden to take the product outside the country
or region where you purchased it, so use it only in
the said country or region. Also, note that depending
on countries or regions there are restrictions on the
channels and frequencies at which you can use the
wireless LAN.
English 17