Panasonic PressIT TY-WP2B1W Operating Instructions - Basic Manual page 14

Transmitter Extension Method (Pairing)
Pairing by saving a file to the USB memory
Supported device
●
Commercially available USB memory devices are
supported. (Those with security functions are not
supported.)
●
USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
●
Up to 32 GB of USB memory in size are supported.
●
Only single partition configuration is supported.
1
Connect the USB memory to the USB
terminal of the receiver.
1
2
Press the FUNCTION button.
The LED lights up in white and the pairing file is
saved to the USB memory.
14 English
Continued
2
3
Remove the USB memory.
4
Slide the mode switch to the EXT side.
5
Supply power to the transmitter.
TY-WPB1W
TY-WPBC1W
5
5 V/0.9 A
Power supply
6
Connect the USB memory to the USB
terminal of the transmitter.
7
Pairing is complete.
The main LED of the transmitter lights up in white.
8
Remove the USB memory from the
transmitter.
5
5 V/0.9 A
Power supply
6
6