Panasonic PressIT TY-WP2B1W Operating Instructions - Basic Manual page 13

Transmitter Extension Method (Pairing)
Pairing settings have been made for transmitter and
receiver of TY-WPS1W Basic Set / TY-WPSC1W Basic
Set.
Pairing by connecting the receiver and
transmitter
1
Slide the mode switch to the STD side.
2
Connect the USB terminal of the transmitter
to the USB terminal of the receiver.
TY-WPB1W TY-WPBC1W
To connect the TY-WPBC1W,
use the conversion adaptor
for pairing supplied with the
TY-WPSC1W/TY-WP2BC1W/
TY-WPBC1W.
Wait for a while until the LED of the receiver blinks in
white. Then, pairing starts automatically.
"Pairing..." (pairing in progress) is displayed on the
standby screen.
3
Pairing is complete.
"Pairing OK" is displayed and the LED of the receiver
lights up in white.
Pairing...
4
Remove the USB cable of the transmitter
from the receiver.
Pairing OK
English 13