Voice Dial Function; Phone Operation Screen; Adjusting The Speech Volume; Changing The Voice Output - Alpine iLX-W650E Owner's Manual

Voice Dial Function

You can make a telephone call by using voice operation.
• Connect your smartphone to the unit via Bluetooth, then set to "Hands-
free" or "Both" (page 18).
1
Touch [ ] button.
The Voice Dial mode screen is activated.
2
Say the telephone number* or name* you want to call,
into the microphone.
* The number and name depend on the voice dial information stored
in the smartphone.
3
To finish the Voice Dial mode, touch [ ].
• You can perform this operation only when a voice dial compatible
smartphone is connected.
• The Voice Dial function performance depends on the recognition range
of the smartphone and mounting location of the microphone.
Note when the microphone is mounted.
• Voice dial operation depends on the function being available on the
smartphone. For details, refer to the owner's manual of the smartphone.
• Depending on the smartphone, the Voice Dial operation may finish
automatically.
• For adjusting the volume, see "Adjusting the Speech Volume" (page 31).

Phone Operation Screen

Adjusting the Speech Volume

You can adjust Caller Level and Mic. Level (Microphone Level).
1
Touch [ ].
2
Touch [ ] or [ ] of "Mic Vol." or "Caller Vol."
You can adjust the volume in 11 levels.
• This operation is not available for the Private Call setting.

Changing the Voice Output

The voice output for calls is switchable between car speakers and the
mobile phone speaker.
Touch [Private] or [Handsfree].
• Depending on the mobile phone, this operation may not be possible.

DTMF (Touch-Tone) Function

Transmits a DTMF (Touch-Tone) during a call.
1
Touch [ ] (Keypad).
The number input screen (Keypad) appears.
2
Input number.
• You can transmit a Touch-Tone signal during a call.
31
-EN