Adjusting The Time Correction (Tcr); Setting The Media Xpander (Mx); Setting Defeat - Alpine iLX-W650E Owner's Manual

• While adjusting the P-EQ, you should consider the frequency response
of the connected speakers.
• To reflect the P-EQ setting, set "EQ" to [Custom] (page 11).
• Touch [Flat] to initialize all values.
Calling the P-EQ adjusted value
Calling the pre-set P-EQ adjusted value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the P-EQ screen.
The setting stored in the Preset will be recalled.
• Presets can be called on [Custom] of the "EQ" setting (page 11).

Adjusting the Time Correction (TCR)

Before performing the following procedures, see "About Time
Correction" (page 14).
Correction mode
Setting item:
TCR
1
Touch the Correction mode button to select [ms], [cm] or
[inch].
2
Touch [ ] or [ ] for each speaker to adjust the time or
distance.
0.0 msec to 9.9 msec (0.1 msec/step)
0.0 cm (0.0 inch) to 336.6 cm (133.7 inch) (3.4 cm/step)
All speaker setting values are adjustable in the range of 15 ms or
510 cm.
3
To store the adjusted setting value, touch and hold
[Preset 1], [Preset 2], or [Preset 3] for at least 2 seconds.
• Touch [Flat] to set all values to 0.0.
• If the Subwoofer setting is [Off], the Subwoofer setting cannot be edited
(page 11).
Calling the Time Correction Value
Calling the pre-set time correction value.
Touch [Preset 1], [Preset 2], or [Preset 3] on the time
correction screen.
The setting stored in the Preset will be recalled.

Setting the Media Xpander (MX)

Media Xpander (MX) makes vocals or instruments sound distinct
regardless of the music source. The USB Flash drive and iPhone, will be
able to reproduce the music clearly even in cars with a lot of road noise.
Setting item:
MX
1
Touch [On] of "All MX OFF/ON".
2
Touch any of [Off] [ ] [
• To cancel MX mode, set [Off] in step 1.
• MP3/WMA/AAC can have its own MX setting.
• When the Defeat setting is [On], you cannot perform the set up.
• The MX setting can be performed only when a source is currently
selected.

Setting Defeat

If Defeat is [On], the MX and Equalizer setting are turned Off. This
disables any settings made for these functions.
Setting item:
Defeat
Setting contents:
Off (Initial setting) / On
] [ ].
13
-EN