Thermal Configuration; Post Behavior - Dell Precision 3930 Rack Setup And Specifications

Identifier
Version
Status

Thermal configuration

Table 28. Thermal configuration
Option
Thermal Mode
CPU Zone
PSU Zone
PCIe Zone
Identifier
Version
Status

Post behavior

Table 29. POST Behavior
Option
Numlock LED
Keyboard Errors
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
48 System setup
GUID-B0E40B48-2D19-4F52-8025-E9A33DAC227A
2
Released
Description
Allows you to determine the speed of the system fans. This option is enabled by default.
● Low
● Auto (Default)
This option is set to Auto by default.
NOTE: This setting applies to all the Zone
Allows you to control the minimum and maximum fan speed in the CPU Zone. The range of
characters is between 0 and 100.
NOTE: When Thermal Mode is set in auto, Zero is the optimal speed level.
Allows you to control the minimum and maximum fan speed in the PSU Zone. The range of
characters is between 0 and 100.
NOTE: When Thermal Mode is set in auto, Zero is the optimal speed level.
Allows you to control the minimum and maximum fan speed in the PCIe Zone. The range of
characters is between 0 and 100.
NOTE: When Thermal Mode is set in auto, Zero is the optimal speed level.
GUID-567FE5D2-00FE-476D-AF72-55A8E9636297
2
Released
Description
Allows you to enable or disable the Numlock feature when your computer starts. This option
is enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. The
option EnableKeyboard Error Detection is enabled by default.
This option creates an additional preboot delay.
● 0 seconds (default)
● 5 seconds
● 10 seconds
This option will display full screen logo if your image match screen resolution. The option
Enable Full Screen Logo is not set by default.
This option causes the boot process to only pause when warning or errors are detected.
Choose any one of the options:
● Prompt on Warnings and Errors—Default
● Continue on Warnings
● Continue on Warnings and Errors