Fitting The Sensors - Wolf TopSon F3-1 Installation, Operating And Maintenance Instructions

Fitting the sensors

Example: F3-1, F3-1Q, F3-Q,
single-sided,
up to 5 collectors
Example: F3-1, F3-1Q, F3-Q,
alternating pipework,
up to 10 collectors
Pipework
Collector sensor 6 mm
3062165_201508
Fitting the sensors
In stagnation the collectors can reach temperatures of up to 200 °C. Therefore
only to use the solar-specific flat gaskets supplied and ensure that the mounting
and connecting components used are sufficiently temperature-resistant,
particularly near the collectors.
Note also the information provided in chapter "Pipework".
Pipework
Collector sensor 6 mm
Sensor well ¾"
Flow connector
Pipework for roof top /
flat roof installation
Return connector
Pipework for roof
integration
Air vent trap
Sensor well ¾"
Flow connector
Air vent trap
1 collector
Return connector
Pipework for roof
integration
1 collector
Pipework for roof
top / flat roof
installation
37