Dc Protector; Ground (Earth) Terminal; Parallel Operation Outlets; Brake - Echo IG3500E Operation Manual

control function

DC PROTECTOR

• Reduce the load of the connected electric device below the speci-
fied rated output of the generator if the DC protector turns off. If the
DC protector turns off again, stop using the device immediately and
consult a franchised dealer.

GROUND (EARTH) TERMINAl

PARAllEl OPERATION OUTlETS

bRAkE

The DC protector turns to "OFF" automatically
when electric device being connected to the
generator is operating and current above the
rated flows. To use this equipment again, turn
on DC protector by pressing its button to "ON".
1. "ON" Direct current is output.
2. "OFF" Direct current is not output.
NOTICE
Ground (Earth) terminal (1) connects the earth
line for prevention of electric shock. When the
electric device is earthed, always the generator
must be earthed.
This is the terminal for connecting special
cables for parallel running of two generator.
The parallel running requires two generator
and the special cables. (The rated output in
parallel running is 5.6Kva and the rated current
is 60A/100V;50A/120V;26A/230V.)
The handing, operation procedure and the
notes on usage are described in the PARALLEL
RUNNING KIT OWNER'S MANUAL included
in the Parallel.
During the operation and idle period of
machine, brake timely and switch to "STOP".
In case of the machine is required to be moved,
switch the brake to "RUN".
13