Table of Contents
Advertisement
Audio Description
• Off
• Auto
Volume
Speakers
• Off
• On
Headphones
• Off
• On
Reset Sound Defaults
Main Menu
Picture
Sound
Setup
Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
H-pos
V-pos
Reset DVI Position
Settings
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Useful for visually-impaired viewers
Sets to [Auto] to activate the description sound track if available
The availability of audio description sound track is indicated by [AD] in
●
the information banner (p. 15).
Digital TV mode only
●
Adjusts the volume for Audio Description
Digital TV mode only
●
Sets to [On] to activate the description sound track from TV speakers
Digital TV mode only
●
Sets to [On] to activate the description sound track from headphones
Digital TV mode only
●
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Adjustments / Configurations (alternatives)
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
●
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
●
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
Adjust after Clock adjustment
●
Set to the minimum level if noise occurs
●
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Sets the time until the TV automatically goes to Standby mode
Adjusts horizontal position
Adjusts vertical position
25
Advertisement
Table of Contents
