Table of Contents
Advertisement
Equaliser
Balance
Headphone Volume
Surround
• Off
• V-Audio
• V-Audio Surround
Auto Gain Control
• Off
• On
Volume Correction
Speaker Distance to Wall
• Over 30cm
• Up to 30cm
MPX
• Stereo
• Mono
• M1
• M2
Digital Audio Preference
• Dolby D
• MPEG
SPDIF Selection
• Auto
• PCM
PCM Optical Level
• -12 / -10 / -8 /
-6 / -4 / -2 / 0 (dB)
HDMI1 / 2 / 3 Input
• Digital
• Analogue
24
Adjusts the frequency level to suit your favourite sound quality
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the
●
cursor button.
If you want to enhance the bass sound, raise the level of the lower
●
frequency. If you want to enhance the treble sound, raise the level of
the higher frequency.
To reset the levels of each frequency to the default settings, select the
●
[Reset Equaliser Settings] by using the cursor button, and then press
the OK button.
Adjusts the volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings
[V-Audio]: Provides a dynamic enhancer of width to simulate improved
spatial effects
[V-Audio Surround]: Provides a dynamic enhancer of width and depth
to simulate improved spatial effects
Switching is also possible by the Surround button on the remote
●
control (p. 11).
Adjusts the current volume level if it is extremely different from the
previous viewed channel or input mode
Adjusts the volume of an individual channel or input mode
Adjusts the low frequency sound
If the back space between the TV and wall is over 30 cm, [Over 30cm]
●
is recommended.
If the back space between the TV and wall is within 30 cm, [Up to
●
30cm] is recommended.
Selects multiplex sound mode (if available)
[Stereo]: Use this normally
[Mono]: When stereo signal cannot be received
[M1] / [M2]: Available while mono signal is transmitted
Analogue TV mode only
●
Selects the initial setting for audio tracks
If programme has both Dolby Digital and MPEG audio tracks, priority is
given to what you select
[Dolby D]: A method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can also be
multi-channel audio.
[MPEG]: An audio compression method that compresses audio to small
size without any considerable loss of audio quality.
●
Digital TV mode only
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
For Digital TV mode, Video mode (p. 41) or Network video contents
●
(p. 52)
Adjusts the audio level of PCM output from DIGITAL AUDIO OUT
terminal as the initial setting
Normally, PCM sound is larger comparing with the other types of
●
audio track.
Digital TV mode only
●
Selects to fit the input signal (p. 63)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
HDMI input mode only
●
Advertisement
Table of Contents
