Table of Contents
Advertisement
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset White
Balance
Gamma
• 1.8 / 2.0 / 2.2 /
2.4 / 2.6
Reset Gamma
Resolution Enhancer
• Off
• Mid
• Max
16:9 Overscan
• Off
• On
DVI Input Setting
• Normal
• Full
Reset Picture Defaults
1 : PC input mode only
Main Menu
Picture
Sound
Setup
Item
Mode
• Music
• Speech
• User
Bass
Treble
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
Please note the numerical values are reference for the adjustment.
●
Press the OK button to reset to the default Gamma
Enhances the resolution to display a sharper image
Not valid when Media Player is in use.
●
[On] : Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off] : Displays image in its original size including edge video noise
such as lines, dashes, dots etc.
Applicable for video signals when TV aspect is set to [16:9]
●
Memorised separately for SD and HD channels / signals
●
Changes the black level in the image for HDMI input mode with DVI
input signal manually
When the DVI input signal from the external equipment, especially from
●
PC, is displayed, the black level may not be suitable. In this case, select
[Full].
The black level for HDMI input signal will be adjusted automatically.
●
For HDMI input mode with DVI input signal only.
●
Press the OK button to reset settings of Picture Viewing Mode to the
default.
Adjustments / Configurations (alternatives)
Selects basic sound mode
The selected mode affects all input signals.
●
[Music]: Improves sound quality for watching music videos, etc.
[Speech]: Improves sound quality for watching news, drama, etc.
In Music and Speech modes, you can adjust [Bass] and [Treble]
●
settings, and those settings will be stored for each mode.
[User]: Adjusts the sounds manually by using the equaliser to suit your
favourite sound quality.
For the User mode, [Equaliser] will appear on the Sound Menu
●
instead of [Bass] and [Treble]. Select the [Equaliser] and adjust the
frequency.
[Equaliser] (p. 24)
Increases or decreases level to enhance or minimise lower, deeper
sound output
Increases or decreases level to enhance or minimise sharper, higher
sound output
23
Advertisement
Table of Contents
