Selector Lever For Automatic Transmission - Subaru 2006 Forester Owner's Manual

Do not shift from the "P" or "N" po-
sition into the "D", "3", "2", "1" or
"R" position while depressing the
accelerator pedal. This may cause
the vehicle to jump forward or back-
ward.
Shift into the "P" or "R" position
only after the vehicle is complete-
ly stopped. Shifting while the ve-
hicle is moving may cause dam-
age to the transmission.
Do not race the engine for more
than five seconds in any position
except the "N" or "P" position
when the brake is set or when
chocks are used in the wheels.
This may cause the automatic
transmission fluid to overheat.
Avoid shifting from one of the for-
ward driving positions into the
"R" position or vice versa until the
vehicle has completely stopped.
Such shifting may cause damage
to the transmission.
When parking the vehicle, first se-
curely apply the parking brake
and then place the selector lever
in the "P" position.
Selector lever for automatic
transmission
P
R
N
D
3
2
1
Starting and operating
: With the brake pedal depressed,
move the lever along the gate.
: Move the lever along the gate.
The selector lever has seven positions.
P (Park)
This position is for parking the vehicle and
700034
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first set the
parking brake fully, then shift into the "P"
position. Do not hold the vehicle with only
the transmission.
A shift interlock function is employed in
the automatic transmission system to en-
7-11
700332
– CONTINUED –