The page includes the following fields:
Object
Root ID
Hello Time
Max Age
Forward Delay
Buttons
: Click to apply changes
4.7.2 STP Port Settings
The CIST Ports Configuration screens in
The page includes the following fields:
Object
Port No.
Priority (0~240)
Path Cost
(1~200000000)
Description
Display the Root ID
Display the Hello Time
Display the Max Age
Display the Forward Delay
Figure 4-7-7
appears.
Figure 4-7-7 STP Port Setting Page Screenshot
Description
Select Port for this drop down list.
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
-Default:
128
-Range: 0-240, in steps of
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The path
cost is used when establishing the active topology of the network. Lower path
cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid
values are in the range
1 ~
68
User's Manual of FGSW-1816HPS
16
200000000.