License Plate Lamp; Replacement Bulbs - Pontiac 2008 G6 Owner's Manual

License Plate Lamp

To replace the license plate lamp bulb:
1. Remove the two screws holding the license plate
lamp assembly to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the lamp
assembly.
5-58

Replacement Bulbs

Exterior Lamp
Coupe and Retractable Hardtop
Sedan
Center High-Mounted Stoplamp
(CHMSL)
Front Parking and Turn Signal
Lamp
Front/Rear Sidemarker Lamp
License Plate Lamp
Headlamps
High-Beam Lamp
Low-Beam Lamp
Stoplamp, Taillamp and Turn
Signal Lamp
Sidemarker, Stoplamp, Taillamp
and Turn Signal Lamp
*Coupe and Sedan only
**Retractable Hardtop only
***Sedan Only
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
3057K
912***
3157KX
194
168
H9
H11
3057K*
3157K**