Menu Descriptions & Functions [Setup]; [General] - NEC UM383WL User Manual

❻ Menu Descriptions & Functions [SETUP]

[GENERAL]

Using Digital Zoom [DIGITAL ZOOM]
This feature allows you to electronically fine adjust the image size on the screen.
NOTE:
• This feature can not be used when USB-A, LAN is selected as a input terminal.
TIP: To adjust the projected image size roughly, move the projector away or closer to the screen. To fine adjust the zoom, use the
[DIGITAL ZOOM] function. ( → page 20)
Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion
manually.
NOTE:
• [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once.
• To change from one item to another item, reset the first item.
• Adjustment values will be overwritten. They will not be deleted even when the projector is turned off.
• Using [KEYSTONE], [PINCUSHION] and [CORNERSTONE] correction can cause the image to be slightly blurred because the correction is
made electronically.
KEYSTONE HORIZONTAL ���������������Corrects horizontal keystone distortion� (→ page 22)
KEYSTONE VERTICAL ��������������������Corrects vertical keystone distortion� (→ page 22)
PINCUSHION LEFT/RIGHT ��������������Corrects pincushion distortion at the left or right side� (→ page 32)
PINCUSHION TOP/BOTTOM �����������Corrects pincushion distortion at the top or bottom side� (→ page 32)
CORNERSTONE ����������������������������Fits a projected image within the border of the screen easily by align the four corner of an image to
RESET ������������������������������������������Returns all the above items to the factory preset values�
TIP:
• The maximum adjustment range with [CORNERSTONE] and [KEYSTONE] corrections is ± 1 0° in the horizontal direction, ± 1 0° in the vertical
direction.
- Depending on input signal, the adjustable range may be narrower.
the ones of the screen� (→ page 30)
65
5. Using On-Screen Menu