Pch-Fw Configuration; Onboard Devices Configuration; Front Panel Type; Spdif Out Type - Asus PRIME Z270-P Manual

SATA6G_1~4(Gray)
SATA6G_1~4(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~4 port. Configuration options: [Disabled]
[Enabled]
SATA6G_1~4 Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Configuration
options: [Disabled] [Enabled]
2.6.6

PCH-FW Configuration

Intel Platform Trust Technology [Disabled]
This item allows you to enable or disable the Intel Platform Trust Technology (PTT).
Configuration options: [Enabled] [Disabled]
2.6.7

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[HD]
[AC97]
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
DVI Port Audio [Disabled]
Allows you to enable or disable DVI port audio. Configuration options: [Enabled]
[Disabled]
LED Lighting [Breathing Mode]
This item allows you to set the audio shielding LED mode. Configuration options: [Disabled]
[Still Mode] [Breathing Mode]
M.2_1/2 Mode Configuration [Auto]
M.2_1/2 shares SATA mode with SATA6G_1/SATA6G_2.
[Auto]
[SATA]
[PCIE]
2-34
Enables the HD Audio Device.
Disables the HD Audio Device.
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets to an SPDIF audio output.
Sets to an HDMI audio output.
Auto detects the M.2 device mode. If a M.2 device is detected, SATA6G_1
/2 will be disabled.
Only supports M.2 SATA devices. SATA6G_1/2 cannot be used in this
mode.
Only supports M.2 PCIE devices.
Chapter 2: Getting started