Table of Contents
Advertisement
Figure 6-4. Removing a Drive Carrier
Figure 6-5. Mounting a Drive in a Carrier
Hard Drive Tray
Use caution when working around the SAS/SATA backplane. Do not
touch the backplane with any metal objects and make sure no rib-
!
bon cables touch the backplane or obstruct the holes, which aid in
proper airfl ow.
Important: Regardless of how many SAS/SATA hard drives are in-
stalled, all drive carriers must remain in the drive bays to maintain
!
proper airfl ow.
Warning! Enterprise level hard disk drives are recommended for use in
Supermicro chassis and servers. For information on recommended HDDs,
!
visit the Supermicro Web site at http://www.supermicro.com/products/nfo/
storage.cfm.
Chapter 6: Advanced Chassis Setup
6-7
Hard Drive
Advertisement
Table of Contents
