Supero A+ SERVER 4042G-TRF User Manual page 3

About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ SERVER 4042G-6RF/
TRF. Installation and maintenance should be performed by experienced technicians
only.
The A+ SERVER 4042G-6RF/TRF is a high-end server based on the SC748TS-
R1400BP chassis and the H8QG6/i-F, a high-end serverboard which is based on the
AMD® SR5690/SR5670/SP5100 chipset and supports four AMD Socket G34 type
processors with up to 512 GB of DDR3-1333/1066 registered ECC SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8QG6/i-F serverboard and
the SC748TS-R1400BP chassis, which comprise the A+ SERVER 4042G-6RF/
TRF.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ SERVER 4042G-6RF/
TRF into a rack and check out the server confi guration prior to powering up the
system. If your server was ordered without processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
iii
Preface