Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Pontiac 2005 Grand Am Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•

Turn and Lane-Change Signals

•
Headlamp High/Low-Beam Changer
•
Flash-to-Pass
•
Exterior Lamps Control
3-8
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions allow
you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you signal
a turn, check for burned-out bulbs and then check the
fuse. See Fuses and Circuit Breakers on page 5-80.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.