Table of Contents
Advertisement
BHT-1700 Series
To check the exact remaining percentage of power and battery life:
1.
Swipe down from the top of the screen with two fingers to open QuickSettings.
2.
The percentage of remaining battery power is shown below the battery icon; you can tap on it to
enter Battery Settings for more details and configurations.
Note:
When BHT is fully charged and battery level reaches 100%, the battery icon will change
from
to
Caution:
1.
Once the battery level drops below 15%, the low battery notification will be displayed on the
screen.
2.
Data loss with RAM may occur when battery level is low. Always save data before the battery
runs out of power or keep a fresh battery for replacement.
3.
Constant use of BHT at low battery level may affect battery life. For maximum performance,
recharge the battery periodically to avoid battery drain and maintain good battery health.
2.1.2 Monitoring Battery Level
Main battery level
The main battery is the only source that feeds BHT to work. It also supplies the backup battery on the
main board in order to avoid the data loss. When the main battery level gets low, recharge it or replace
it as soon as possible. Most critically, back up the important data from time to time to protect your
work.
To check main battery level:
Tap All apps
Battery level percentage is also shown to provide a clear grasp of the remaining battery power. The
screen also shows the rate of battery discharge since the last battery charging session, how long the
to indicate that charging is completed.
| Settings
| Battery
.
28
Advertisement
Table of Contents
