Bulb Replacement
For the proper type of replacement bulbs, see
Replacement Bulbs on page 5-50.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen Bulbs
CAUTION:
{
Halogen bulbs have pressurized gas inside
and can burst if you drop or scratch the bulb.
You or others could be injured. Be sure to
read and follow the instructions on the bulb
package.
5-46
Headlamps
1. Open the hood. See Hood Release on page 5-11
for more information.
3. Unsnap the headlamp assembly by pulling it
forward, away from the vehicle.
4. Disconnect the electrical connector by pulling back
on the locking tab, located on the electrical
connector, to separate the two connectors.
2. Push in on the
headlamp and lift up
the headlamp retaining
clip partway, but do
not remove.