Exiting Programming Mode - Pontiac 2005 Aztek Owner's Manual

The mode you selected is now set. You can either exit
programming mode by following the instructions later in
this section or program the next feature available on
your vehicle.
Lock Feedback
The lock feedback feature can be programmed to one
of the following modes:
OFF: When LOCK is pressed on the remote keyless
entry transmitter, the headlamps and parking lamps will
not flash and the horn will not sound.
LIGHTS: When LOCK is pressed on the remote
keyless entry transmitter, the headlamps and parking
lamps will flash briefly.
HORN: When LOCK is pressed on the remote keyless
entry transmitter, the headlamps and parking lamps
will flash briefly and the horn will sound.
Your vehicle was originally programmed to HORN. The
mode may have been changed since then. To determine
the current mode, or to change the mode, do the
following:
1. Follow the instructions for "Entering Programming
Mode" listed previously.
2. Press the MODE button until LOCK FEEDBACK
appears on the DIC.
3. Press the SET button until the arrow is before OFF,
LIGHTS, or HORN.
3-58
The mode you selected is now set. You can now exit
programming mode by following the instructions next in
this section.

Exiting Programming Mode

To exit programming mode, do one of the following:
•
Shift out of PARK (P).
•
Turn the ignition key out of ON.
•
Do not program any commands for one minute
while in the programming mode.
The programming mode message will turn off to let you
know that you are no longer in the programming mode.
Once you have reached the end of the personalization
features, PERSONALIZATION SELECTION IS
DONE will appear briefly. Then PRESS SET TO EXIT
MODE TO CONTINUE will appear. Pressing SET
will exit you out of the DIC. Pressing MODE will take
you to the beginning of personalization.