Care Of Safety Belts - Pontiac 2003 Sunfire Owner's Manual

Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt. You
may have to do this more than once.
e
Things like tar, asphalt and shoe polish will stain if
you don't get them off quickly. Use a clean cloth
and vinyl/leather cleaner. See your dealer for
this product.
Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones
or waxes may cause annoying reflections in the
windshield and even make it difficult to see through the
windshield under certain conditions.
Interior Plastic Components
Use only a mild soap and water solution on a soft cloth
or sponge. Carrrrnerciai
ciearlers r r ~ a y aiieci
ii~le
surface finish.
Glass Surfaces
liquid kGusekolci glass clezner will remeve norn?al
Glass should be cleaned often. GM Glass Cleaner or a
tobacco smoke and dust films on interior glass. See GM
Vehicle Care/Appearance Materials on page 5-77.
Notice: Don't use abrasive cleaners on glass,
because they may cause scratches. Avoid placing
decals on the inside rear window, since they
may have to be scraped off later. If abrasive cleaners
are used on the inside of the rear window, an
electric defogger element may be damaged. Any
temporary license should not be attached across the
defogger grid.
Care of Safety Belts
Keep belts clean and dry.
Do not bleach or dye safet, delts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate
protection. Clean safety belts only with mild
I
soap and lukewarm water.
I
5-73