Windshield Wiper Blade Replacement - Pontiac 2001 Aztek Owner's Manual

4. Unscrew the bulb socket from the lamp assembly
by pressing the tab while turning the bulb
socket counterclockwise.
5. Replace the bulb by pulling the old one out and
gently pushing the new one into the bulb socket.
6. Line up the tabs on the bulb socket with the gaps
in the socket holes and screw the bulb socket back
into the lamp housing. You will hear a click.
6-38
A. Stop/Taillamps
-
B. Back up Lamps
7. To reinstall, align the pins on the back of the lamp with
the sockets on the outboard side of the lamp opening.
8. Push forward until the pins snap into the socket.
9. Reinstall the screws removed in Step 2.

Windshield Wiper Blade Replacement

Windshield wiper blades should be inspected at least
twice a year for wear or cracking. See "Wiper Blade
Check" in the Index for more information.
Replacement blades come in different types and are
removed in different ways. For proper type and length, see
"Normal Maintenance Replacement Parts" in the Index.
Here's how to remove the wiper blades:
1. Turn the wipers on to the lowest intermittent setting.
2. Turn off the ignition while the wipers are at the
outer positions of the wipe pattern. The blades are
more accessible for removal/replacement while in
this position.
3. Pull the windshield wiper arm away from the
windshield or backglass.