Pontiac 2001 Aztek Owner's Manual page 23

3. Firmly push the rear hooks onto the rear floor pins
by pushing down on the rear of the seat.
2. Make sure the bench
seat is angled so that
the front hooks clear the
floor pins. If the front
legs are not attached
correctly, the rear legs
will not attach to the
rear set of floor pins.
4. Try to raise the seat to check that it is locked down.
CAUTION:
A seat that isn't locked into place properly can
move around in a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
5. Lift the seatback recliner lever and raise the seatback
until it locks upright.
6. Push and pull on the seatback to check that it is
locked upright.
CAUTION:
If the seatback isn't locked, it could move forward
in a sudden stop or crash. That could cause injury
to the person sitting there. Always press rearward
on the seatback to be sure it is locked.
7. Attach the lap belt.
1-11