Advertisement
Table of Contents
The voltage switch must be set correctly to avoid damaging your
computer. If you need to change the setting, insert a screwdriver
in the slot and slide the switch. Set the switch to "115" for volt-
ages in the 100-130V range. Set the switch to "230" for voltages in
the 220-240V range. If you don't know the voltage used in the
country you're in, refer to the table "Voltages for Different Loca-
tions" later in this chapter.
Insert the end of the power cable with the socket into
3.
the recessed socket on the back of the computer.
Plug the other end of the
4.
grounded outlet or power strip.
Your SuperMac C600x computer is equipped with a three
WARNING:
wire grounding plug. This equipment is intended to be electrically
grounded. This plug will fit only a grounded AC outlet. If you are unable
to insert the plug into the outlet that you want to use, contact a licensed
electrician to replace the outlet with one that is properly grounded. Do
not defeat the purpose of the grounding plug.
Before you plug your computer in,
check to see that the voltage switch
on the back is properly set. If you
need to change the setting, insert
a small screwdriver here and slide
the switch.
For operation in the USA, set this
switch to show 115. For other
countries, refer to the table later
in this chapter.
power cord into a three hole,
Index
Advertisement
