Table of Contents
Advertisement
Available languages
Available languages
To switch off the scales, press
5.
start processing.
Tip: Also use the scales together
with the accessory. Weigh the in-
gredients directly when adding them,
e.g. to the blender attachment or the
ice maker.
Note: The scales switch off automat-
ically after approx. 3 minutes of in-
activity.
8.3 Changing the display
units of the scales
Requirements
¡ The rotary switch is set to
¡ The scales are switched on.
Press and hold
1.
The display unit for the scales
changes.
Symbol
Release both buttons.
2.
a The scales will calibrate them-
selves and restart with the
changed setting.
a The setting is saved.
Timer
9 Timer
You can read off the processing time
Timer
that has elapsed or reset it.
9.1 Display values of timer
Observe the following values when
using the timer.
Display range
.
and .
Unit
Display in
grammes
Display in
pounds
0 seconds to
59 minutes and
59 seconds
or
Display steps
9.2 Reading off and resetting
the processing time
Set the rotary switch to the re-
1.
quired speed.
a The display shows the processing
time.
To reset the display to "00:00"
2.
press
Notes
¡ If you interrupt processing for less
than 30 seconds, the last values
displayed are saved and will re-
sume if processing starts again.
¡ If you interrupt processing for
more than 30 seconds, the appli-
ance will switch on the scales and
perform calibration.
Cleaning and servicing
10 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
10.1 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
Do not use cleaning agents con-
▶
taining alcohol or spirits.
Do not use sharp, pointed or metal
▶
objects.
Do not use abrasive cloths or
▶
cleaning agents.
1 second
.
Timer en
21
Advertisement
Chapters
Table of Contents
