Mazda 2009 CX-7 Manual page 308

Hide thumbs Also See for 2009 CX-7:
Table of Contents

Advertisement

Interior Comfort
Interior Equipment
qClock
When the ignition switch is in the ACC or
ON position, the time is displayed.
Without navigation system
Time setting
1. Press the CLOCK switch 1.5 seconds
or more and the displayed time flashes.
2. Press the H switch to set the hour.
3. Press the M switch to set the minutes,
then press the CLOCK switch.
Switching between 12 and 24-hour
clock time
1. Press the audio control dial several
times until 12Hr and 24Hr clock time
are displayed.
2. Turn the audio control dial in either
direction, select the desired clock
setting, and then press the audio
control dial. Press the dial while the
preferred clock time is flashing.
With navigation system
Refer to the separate manual
NAVIGATION SYSTEM .
6-86
NOTE
Minutes and seconds are adjusted by the GPS,
however, it is necessary to adjust hours under
the following conditions:
Driving across different time zones
l
Daylight saving time start and end
l
qAmbient Temperature Display
(Fully Automatic Type)
When the ignition switch is in the ON
position, press the AMB switch to display
the ambient temperature.
NOTE
Under the following conditions, the ambient
l
temperature display may differ from the
actual ambient temperature depending on
the surroundings and vehicle conditions:
Significantly cold or hot temperatures.
l
Sudden changes in ambient temperature.
l
The vehicle is parked.
l
The vehicle is driven at low speeds.
l
Press the AMB switch a few seconds or
l
more to switch the display from Fahrenheit
to Centigrade or vice versa.
(With fully automatic climate control
l
system)
Press the AMB switch again to switch the
display from ambient temperature to the
temperature set for the air conditioner.

Advertisement

Table of Contents
loading

Table of Contents