Mazda 2009 CX-7 Manual page 290

Interior Comfort
Bluetooth Hands-Free
24. Say: [Beep] Yes
25. Prompt: Pairing complete
After a mobile telephone is registered, the
system automatically identifies the phone.
By activating Bluetooth Hands-Free
again, or by activating Bluetooth Hands-
Free first after turning the ignition switch
from the LOCK to the ACC position, the
system reads out a voice guidance,
XXXXXX - - - (Ex. Stan's phone )
(Phone tag) is connected . If two or more
telephones are registered, the one with the
highest priority is selected.
qMaking a call using a telephone
number
1. Activate Bluetooth Hands-Free (page
6-65).
2. Say: [Beep] Dial
3. Prompt: Number, please
4. Say: [Beep] XXXXXXXXXXX (Ex.
555-1234 ) (Telephone number)
5. Prompt: Dialing XXXXXXXXXXX
(Ex. 555-1234 ) (Telephone number)
is this correct?
6. Say: [Beep] Yes or No .
7. When Yes is spoken, the procedure
proceeds to Step 8.
When No is spoken, the procedure
returns to Step 3.
8. Prompt: Dialing
6-68
qReceiving an incoming call
1. Prompt: Incoming call, press the
pickup button to answer .
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
qHanging up a call
Press the hang-up button during the call.
Beep will confirm that call is ended.
qVolume adjustment
Turn the power/volume dial of the audio
unit or navigation system to adjust the
volume.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
Audio unit
NOTE
The volume can also be adjusted using the
l
volume button on the steering wheel.
The music volume of the audio unit and the
l
navigation system cannot be adjusted while
Bluetooth Hands-Free is being used.
Navigation system