Mazda 2002 626 Owner's Manual page 125

J94S.book Page 9 Saturday, June 23, 2001 1:04 PM
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
CAUTION
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-21).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off.
NOTE
• When maximum cooling is desired,
set the temperature control dial to
the extreme cold position and set
the air intake selector switch to the
recirculated air position, then set the
fan control dial to the position 4.
• If warmer air is desired at floor
level, set the mode selector switch
at the position and adjust the
temperature control dial to maintain
maximum comfort.
• The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Form No. 8Q50-EA-01G
Climate Control System
M M M M Ventilation
1. Set the mode selector switch to the
position.
2. Set the air intake selector switch to the
outside air position (indicator light off).
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
M M M M Windshield Defrosting and
Defogging
Interior Comfort
6-9