Honda 2010 Ridgeline Owner's Manual page 53

3. Route the tether strap downward
properly, making sure the strap is
not twisted.
4. Attach the tether strap hook to the
outer tether anchor on the outside
of the seat bottom.
5. Tighten the strap according to the
seat maker's instructions.
Using the Center Tether Anchor
Make sure to attach the tether strap
hook to the anchor before installing
the child seat, because the tether
anchor is positioned behind the child
seat.
1. Place the child seat on the rear
seat.
2. Push down the rear center head
restraint to the lowest position.
2010 Ridgeline
Installing a Child Seat
UPPER GUIDE
CENTER TETHER ANCHOR
3. Route the tether strap over the
seat-back, lift the cover, then hook
the tether strap through the upper
guide as shown.
4. Route the tether strap downward
properly along the seat-back,
making sure the strap is not
twisted.
CONTINUED
49