Ignition Switch - Honda 2008 Ridgeline Owner's Manual

Main Menu

Ignition Switch

The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
82
Table Of Contents
LOCK (0)
remove the key only in this position.
To turn the key, the shift lever must
be in Park, and you must push the
key in slightly.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
ACCESSORY (I)
operate the audio system and the
accessory power sockets in this
position.
ON (II) −
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from the
ACCESSORY (I) to the ON (II)
position.
2008 Ridgeline
You can insert or
−
You can
−
This is the normal key
Use this position
START (III) −
only to start the engine. The switch
returns to the ON (II) position when
you let go of the key.
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or the
ACCESSORY (I) position and open
the driver's door. Remove the key to
turn off the beeper.
The shift lever must be in Park
before you can remove the key from
the ignition switch.