Honda 2008 Ridgeline Owner's Manual page 263

Main Menu
Replacing Rear Bulbs
1. Drop open the tailgate.
2. Remove the two bolts, and remove
the rear light assembly from the
rear pillar.
3. Determine which of the three
bulbs is burned out: brake/
taillight, turn signal/hazard light,
or back-up light.
Table Of Contents
4. Remove the socket by turning it
one-quarter turn counterclockwise.
5. Remove the burned-out bulb by
pulling it straight out of the socket.
2008 Ridgeline
6. Install the new bulb into the
socket.
7. Push the socket into the light
assembly, and turn it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Install the rear light assembly in
the rear pillar. Tighten the two
bolts securely.
Lights
259